Home Fresadora de pórtico - 18 metros - DYE Fresadora de pórtico - 18 metros - Online auction
ManufacturerDye Model18.000MM ObservationsGantry milling machine: CNC control SIEMENS 840 D
Working field: Longitudinal course X: 18,000 mm
Bridge width: 2,200 mm Bridge height: 1658 mm
Maximum distance from table to head: 1,400 mm
Y axis travel: 2,800 mm
Z axis travel: 1,200 mm
V axis travel: 400 mm
W axis travel: 1,200 mm
Table width (GG-30): 1,500 mm
9 channels in "T" every 175 mm.
Central channel is approximately 20.3 mm 8 channels remaining at less than 20 mm. The 20 mm cove does not enter. We use "T" for M18.
Vertical head travel: 1,200 mm
Heads:
Main head power: 50 hp
Two heads with automatic transmission.
A direct head and an angular head with rotation every 2.5º, and in a range of between -105º and 105º.
Power of the side head: 30 hp Rotation main head axis: 2,000 rpm Turn side head axis: 1,000 rpm
Mooring tool: automatic hydraulic.
Advances: X axis advance: 1-10,000 mm/min
Y-axis advance: 1-10,000 mm/min
Z-axis advance: 1-5,000 mm/min
V-axis advance: 1-5,000 mm/min,
Advance W axis: 1-5,000 mm/min
Drive axes Y, Z, V, W: ball screw Drive X axis: feed box Measurement system: Axes X, Y, Z: measurement rule SONY Axes V, W: measurement rule SONY Positioning accuracy: hundredths.
X axis assembly: The table moves on the guide benches supporting and guided by means of roller skates guided on the ruler.
Y-axis assembly: The carriage moves over the bridge supporting and guided by means of ball skates on cemented, tempered and rectified rulers. The carriage is made of steel.
Z-axis assembly: The head has for its displacement chromium-molybdenum steel rules, tightly tied, cemented, tempered and rectified.
The support and guidance is carried out on a perfectly adjusted SKC surface that has the Y axis carriage
The displacement of the Z axis is carried out by spindle with belt drive - toothed pulley by means of a servomotor.
All spindles of the machine are covered by bellows. All pulleys, motors, etc. are covered by housings.
Powers:
A.C. head motor: 50HP at 5,000 rpm
Machine input voltage: 220 V
Manoeuvre: 24 V
Main measures:
Total length: 40,000 mm Total width: 5,070 mm Total height: 4,355 mm Approximate weight: 200,000 kg
No. of items: 1
Dismantling and loading on truck not included.
Recomended lots
Confirm your maximum bid
Confirm your maximum bid
Loading…
Conecting
Are you sure you want to buy the lot?
