Home Fabrica sector conservero - Yanagiya Autoclave - Online auction
ManufacturerHIRAYAMA Model Hiclave HG-80 Year2006 ObservationsSPECIFICATIONS OF HG-80 AUTOCLAVE
Outside (19.7W x 27.2D x 35.0H) in
Dimensions (455W x 691D x 890H) mm
Chamber (14.3D x 28.7H) in,
Dimensions (364D x 730H) mm
Chamber Volume 76L working, 85.1L actual
Temperature Range 105°C to 135°C
Sterilization Timer 1 to 300 minutes
Media Warming/ Holding Temperature
Programmable at 45°C to 60°C to keep media warm up to 24 hours
Auto-Start Timer Initiate a cycle 1 to 99 hours later
Cooling Fan Switch to turn fan on or off
Air Removal Timer
Programmable, 3 to 9 minutes after temperature has reached 97°C
Steam Venting
Selectable from: No venting and three other venting rates
Temperature for Release of Lid Interlock
Programmable, 60°C to 97°C for greater safety and flexibility
Sterilization Program Cycles
1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle
Additional Cycle for Agar Dissolution
Cycle for dissolving and keeping agar warm (no sterilization)
Agar Dissolution Protocol
Initially at 60°C-100°C for 1-60 min, then at 45°C-60°C for up to 24 hours.
Safety Features
Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve (0.26MPa gauge), sensor for improper lid closing
Steam Condenser 15-liter water tank
Drain Water Bottle 2 liters
Power Requirements 220V, 50/60 Hz, single phase
Power Consumption 3.7 kilowatts
No. of items: 1
Recomended lots
Confirm your maximum bid
Confirm your maximum bid
Loading…
Conecting
Are you sure you want to buy the lot?
